Huawei DBS3900 Installation Manual page 88

DBS3900 (ICR)
Installation Guide
Figure 11-4 Removing the protective plates
Step 2 Install two mounting ears vertically on both sides of the IMB03 and tighten the three screws on
each side to 1.2 N·m (10.62 lbf·in.), as shown in
Figure 11-5 Installing mounting ears vertically
Step 3 Place the IMB03 in between the feet and tighten the two screws on both feet to secure the IMB03
onto the ICR, with a torque of 3 N·m (26.55 lbf·in.), as shown in
Issue 12 (2015-04-30)
NOTE
After all cables are installed, if there is spare space in the cable holes, cut the protective plates to an
appropriate shape to seal the cable holes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Installing the IMB03
Figure 11-5.
Figure 11-6.
83