DBS3900 (ICR)
Installation Guide
Figure 15-52 Installing the GPS clock signal cable
Step 6 Install the GPS jumper, as shown in
1.
2.
3.
4.
Issue 12 (2015-04-30)
Cut the cable to a length suitable for the actual cable route.
Install an N50 straight male connector at each end of the cable according to the instructions
in Installing the Type N Coaxial Connector.
Connect one end of the cable to the type N female connector (labeled Surge) on the GPS
surge protector.
Route the other end of the cable along the right side of the IFS06. Then connect it to the
external GPS antenna.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
15-53.
15 Installing Cables
155