Huawei DBS3900 Installation Manual page 84

DBS3900 (ICR)
Installation Guide
Step 4 Connect the OT terminal at one end of the PGND cable for the GPS surge protector to the ground
terminal on the GPS surge protector, and the other end of the PGND cable to the ground bar on
the IFS06, as shown in
Figure 10-5 Installing the PGND cable for the GPS surge protector
Step 5 Lay out the cables according to the instructions in
ties to bind the cables.
Step 6 Label the installed cables according to the instructions in Attaching a Sign Plate Label.
----End
Issue 12 (2015-04-30)
Figure 10-5.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Installing the GPS Surge Protector
15.1 Cabling Requirements, and use cable
79