...4 CONFIGURATION
...4.6.4 Alarm Configuration
70
When the 'Enable source' is active, the alarm is enabled.
When the source is inactive the alarm is disabled. If set to
'None' the alarm is always enabled.
Note. For
Delayed
Process
Fig. 4.15.
Set to 'On' to record all changes in the alarm state in the
Alarm event log – see Section 2.7.
Assign the alarm to one or more of 12 groups.
The alarm states assigned to each group are 'OR'd' together
to create an internal digital signal that may be assigned to
relays, digital outputs or internal digital commands.
alarm
operation,
see