Overview Of Configuration - ABB SM2000 User Manual

4.2 Overview of Configuration – Fig. 4.3
1 Select the Common Configuration icon in the main configuration window
System Configuration
Common Process
Configuration Group 1
Group 2 I/O
Channels Modules
Notes.
1 The number of Process Group and Channel Icons change to reflect the number of Process Groups
that are currently enabled.
2 It is also possible to exit Configuration screens by pressing the
Group 1 Process
Channels Group 2
Functions
Fig. 4.3 Overview of Configuration Steps
(see Note 1 below)
Close the Configuration Window and Save
7
or Cancel the changes
(see Note 2 below)
1 5
Repeat steps to for the remaining icons
6
in the Configuration Window
4
Select the next tab (in this case 'Time') and repeat steps
Close the current configuration window
5
(in this case 'Common Configuration')
(see Note 2 below)
Edit the first parameter on the first Tab
2
(in this case the 'Configuration Type' in the 'Set Up' tab.
3
Repeat for each parameter, as required
4 CONFIGURATION...
.
2
and
key.
3
.
39