Common Configuration; Set Up - ABB SM2000 User Manual

4.4 Common Configuration

System Configuration
Common Process
Configuration Group 1
Group 2
I/O
Channels
Modules

4.4.1 Set Up

•1 A new channel data file is created if this parameter is changed. All unarchived channel data will be lost.
Group 1 Process
Channels Group 2
Functions Commissioning
Fig. 4.7 Selecting Common Configuration
Select the Configuration type required – see Section 4.1.1.
•1
Note. Parameters applying only to Advanced or to Basic
Configuration are identified
Enter the number of Process Groups required.
Each Process Group has 6 recording channels pre-assigned
to it – Group 1 (Ch1.1 to 1.6), Group 2 (Ch2.1 to 2.6).
If the Number of Groups is changed from 2 to 1,
configuration data for Process Group 2 is retained but not
used.
Select the language to be used to display standard user
prompts and menu items.
A digital source can be used to acknowledge active alarms in
both Process Groups 1 and 2. Refer to APPENDIX 1 for a full
list of sources available.
Enter the tag to be used to identify the instrument on
configuration and audit log files.
Select the waiting time between the last key press and
screen saver activation.
4 CONFIGURATION...
A B
and respectively.
43