Totalizer Log - ABB SM2000 User Manual

2.8 Totalizer Log – Fig. 2.8
Notes.
• This view provides an historical log of totalizer activity. To view the current totalizer status, choose the Process or Digital
View.
• When the totalizer log has reached the maximum number of entries defined in the Configuration level (see Section 4.4.3),
the oldest data is overwritten by the newest.
• The logging of totalizer values can be triggered at pre-determined intervals or by a digital signal assigned to the Totalizer
Log Source – see Section 4.6.5.
Icon –
see list below
Log Entry Number
Batch total at the
time of the event
Max., min. and
average of the value
being totalized at the
time of the event
Selects Process
For a description of the range of Totalizer Icons displayed in the Totalizer Log

Totalizer Log

No Tag/Value
00 Total Daily In Flow
0005402801 Litres
225.4 l/hr
110.9 l/hr
201.0 l/hr
01 Total Daily Out Flow
0005403191 Litres
235.8 l/hr
110.9 l/hr
210.0 l/hr
02 Total Daily Out Flow
0005403120 Litres
Group 1
Selects the
Audit Log
and the Process View, refer to the Rear Foldout.
Note. Maximum, Minimum and Average statistics are not
shown unless enabled in the Filters menu – see overleaf.
Fig. 2.8 Totalizer Log
28/03/00
14:52:00
Source Tag Date Time
In Flow 28/03/00
Out Flow 28/03/00
Out Flow 28/03/00
Opens the Operator Menu
for the current view
2 OPERATION...
View previous
page of data
Oldest
14:52
Data
14:52
15:01
Newest
Data
View next page
of data
19