Time - ABB SM2000 User Manual

...4 CONFIGURATION

4.4.2 Time

44
Set the current date and time.
Note. Enter the required daylight saving settings before
setting the time and date as the operation of the internal
clock is affected by the daylight saving settings.
Notes.
• The date and time cannot be adjusted if recording is
enabled during configuration, i.e the 'Disable recording in
configuration' check box is
Configuration level – see Fig. 4.1.
• Changes to the date and time are effective immediately,
not when the configuration is saved.
• Setting an earlier date or time results in the loss of all data
currently in the internal buffer memory past that date. Data
archived to external media is unaffected. If an earlier time
must be set, change the Instrument Tag (see previous
page). This causes new archive files to be created and the
duplicated hour of data is then saved to the new files.
• Time changes due to automatic daylight saving do not
affect the recorded data.
• Only on issue 5.8 or later of the Company's DataManager
data analysis software package is the database feature
compatible with daylight saving.
ticked on entry to the
not