Configuring The Bargraph Display - ABB SM2000 User Manual

4.5.3 Configuring the Bargraph display

Alarm Trip Level
(not shown for slow and
fast rate alarms)
Maximum Value
(solid color)
Instantaneous Value
Minimum Value
(white fill)
Bar
Recording Chart Process
Horizontal
Bar graph view enable
Max, Min and Alarm Trips
Bar graph markers
1 2 3
Menu enables
Bar graph menu enables
1. Message select enable
2. Alarm acknowledge enable
3. Max/min reset enable
Group 1
Level Pressure In Flow
2.08 4 204.9
metres bar l/hr
5.0 5.0 300
2.5 2.5 150
0.0 0.0 0
Analog Channels
Identical Maximum
and Minimum
Digital Archive
28/03/00
14:52:00
Out Flow Temp Alarm 1
198.9 195 On
l/hr °C
300 250
150 125
0.0 0
Digital
Channel
Values
Minimum below
engineering limit,
maximum above
engineering limit
Select the Bargraph views that can be displayed in the
current Process Group.
Select the markers (channel-colored max./min. indicators
and alarm trip points) to be displayed on the bargraph.
Select the menu items to be accessible from the Bargraph
views.
Message select enable
Allows the Operator to activate one of six pre-configured
messages.
Alarm acknowledge enable
Allows the Operator to acknowledge any alarms associated
with the current group.
Max/min reset enable
Allows the operator to reset the maximum and minimum
values of one or more channels to the current value.
Note. Menu items that are not enabled appear greyed out
on the Bargraph menu.
4 CONFIGURATION...
Engineering High Value
Engineering Middle Value
Engineering Low Value
53