Common Configuration; Setup - ABB SM1000 User Manual

...4 CONFIGURATION

4.4 Common Configuration

4.4.1 Setup

44
Common
Group 1
Channels 1.1 - 1.6
Group 2
Channels 2.1 - 2.6
Functions
I/O Modules
Exit
Fig. 4.8 Selecting Common Configuration
Configuration type is fixed as 'Basic'.
Enter the number of process groups required.
Each process group has 6 recording channels pre-assigned
to it – Group 1 (Ch1.1 to 1.6), Group 2 (Ch2.1 to 2.6).
If the Number of Groups is changed from 2 to 1,
configuration data for Process Group 2 is retained but not
used.
Select the language to be used to display standard user
prompts and menu items.
Select a signal source used to acknowledge all active alarms
in both Process Groups simultaneously. Refer to APPENDIX 1
for a description of the available sources.
Note. This signal is edge-triggered. A rising edge (inactive to
active) or falling edge (active to inactive) triggers global alarm
acknowledgement.
Enter the tag to be used to identify the instrument on
configuration and audit log files.
Select the waiting time between the last key press and
activation of the screen saver.
Adjust screen contrast – refer to Section 4.2.1.