Direct Integer Inputs And Outputs - GE N60 Instruction Manual

INPUTS/OUTPUTS
The
DIR ANA 1 INTEGRITY
FlexLogic operands are provided to indicate the most recent trigger condition: Only one operand can be active
32 FORCED
(logic 1) at any time. If a direct device is offline, all of the associated trigger operands are inactive (logic 0).
The figure illustrates the operation of the direct analogs feature. In this example, UR-1 is configured to use four out of its 32
analog channels. These four values are selected from two sources. UR-2 is configured to receive two out of the four analog
values sent, and UR-3 is set to receive three values. Note that
3.
5

5.9.8 Direct integer inputs and outputs

5.9.8.1 Menu
SETTINGS  INPUTS/OUTPUTS  DIRECT INTEGERS
 DIRECT INTEGERS

5-308
to
DIR ANA 32 INTEGRITY, DIR ANA 1 DEADBAND
Figure 5-170: Direct analogs sample application
 DIRECT INTEGER

 OUTPUTS
 DIRECT INTEGER

 INPUTS
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
to DEADBAND, and
DIR ANA 32
is effectively being received at both UR-2 and UR-
SRC 2 FREQ
See below
See page 5-309
CHAPTER 5: SETTINGS
to
DIR ANA 1 FORCED DIR ANA