Direct Analogs; Rxgoose Analogs; Sensitive Directional Power; Frequency Rate Of Change - GE N60 Instruction Manual

METERING

6.4.9 Direct analogs

ACTUAL VALUES  METERING  DIRECT ANALOGS
 DIRECT ANALOGS

The values for the 32 direct analog inputs are available for display. The values are displayed with the units programmed in
the
DIRECT ANALOG 1 UNITS

6.4.10 RxGOOSE analogs

ACTUAL VALUES  METERING  RxGOOSE Analogs
 RxGOOSE
 Analogs
The N60 is provided with optional GOOSE communications capability. This feature is specified as a software
option at the time of ordering. See the Order Codes section of chapter 2 for details.
The RxGOOSE Analog values display in this menu. The RxGOOSE Analog values are received via IEC 61850 GOOSE
messages sent from other devices.

6.4.11 Sensitive directional power

6
ACTUAL VALUES  METERING  SENSITIVE DIRECTIONAL POWER  DIRECTIONAL POWER 1(2)
 DIRECTIONAL
 POWER 1
The effective operating quantities of the sensitive directional power elements display here. The display is useful to calibrate
the feature by compensating the angular errors of the CTs and VTs with the use of the

6.4.12 Frequency rate of change

ACTUAL VALUES  METERING  FREQUENCY RATE OF CHANGE 1(4)
 FREQUENCY RATE
 OF CHANGE 1
The metered frequency rate of change for the frequency rate of change elements is shown here.

6.4.13 Phasor Measurement Unit

ACTUAL VALUES  METERING  PHASOR MEASURMENT UNIT  PMU 1(6)
 PMU 1

6-24
ANALOG INPUT 1:

0.000

ANALOG INPUT 32:

0.000
to settings.
DIRECT ANALOG 32 UNITS
RxGOOSE Analog 1

0.000

RxGOOSE Analog 32

0.000
DIRECTIONAL POWER 1

3Φ: 0.000 W
FREQUENCY RATE OF

CHANGE1: 0.00 Hz/s
PMU 1 VA:

0.000 V
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
and
RCA
Range: Va or Vab per VT bank connection
0.00°
CHAPTER 6: ACTUAL VALUES
settings.
CALIBRATION