GE N60 Instruction Manual page 315

CHAPTER 5: SETTINGS
Table 5-15: Recommended settings for user-programmable LEDs
Setting Parameter
LED 1 operand SETTING GROUP ACT 1
LED 2 operand SETTING GROUP ACT 2
LED 3 operand SETTING GROUP ACT 3
LED 4 operand SETTING GROUP ACT 4
LED 5 operand SETTING GROUP ACT 5
LED 6 operand SETTING GROUP ACT 6
LED 7 operand Off
LED 8 operand Off
LED 9 operand BREAKER 1 OPEN
LED 10 operand BREAKER 1 CLOSED
LED 11 operand BREAKER 1 TROUBLE
LED 12 operand Off
See the figure in the Setting Groups section of the Control Elements section later in this chapter for an example of group
activation.
5.3.12.6 Event cause LED 1(9)
SETTINGS  PRODUCT SETUP  USER-PROGRAMMABLE LEDS  EVENT CAUSE LED 1(9)
 EVENT CAUSE LED 1

For the graphical front panel, the event cause LED settings select the FlexLogic operands that control the LEDs.
— If set to "Self-Reset," the LED illumination tracks the state of the selected LED operand. If set to "Latched," the
LED 1 TYPE
LED, once lit, remains so even the LED operand state already de-asserts, until reset by the front panel RESET button, from a
remote device via a communications channel, or from any programmed operand.
The table outlines default input operand and output operands for each event cause LED.
Table 5-16: Default input and output operand for event cause LEDs
LED Default input operand
Event Cause LED 1 LED PICKUP
Event Cause LED 2 LED VOLTAGE
Event Cause LED 3 LED CURRENT
Event Cause LED 4 LED FREQUENCY
Event Cause LED 5 LED OTHER
Event Cause LED 6 LED PHASE A
Event Cause LED 7 LED PHASE B
Event Cause LED 8 LED PHASE C
Event Cause LED 9 LED NEUTRAL/GROUND
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Setting
LED 13 operand
LED 14 operand
LED 15 operand
LED 16 operand
LED 17 operand
LED 18 operand
LED 19 operand
LED 20 operand
LED 21 operand
LED 22 operand
LED 23 operand
LED 24 operand
LED 1 OPERAND:

LED PICKUP
LED 1 COLOR:

Green
LED 1 TYPE:

Self-Reset
Output operand
EVENT CAUSE LED 1
EVENT CAUSE LED 2
EVENT CAUSE LED 3
EVENT CAUSE LED 4
EVENT CAUSE LED 5
EVENT CAUSE LED 6
EVENT CAUSE LED 7
EVENT CAUSE LED 8
EVENT CAUSE LED 9
Parameter
Off
BREAKER 2 OPEN
BREAKER 2 CLOSED
BREAKER 2 TROUBLE
SYNC 1 SYNC OP
SYNC 2 SYNC OP
Off
Off
Off
Off
Off
Off
Range: FlexLogic operand
Range: Red, Green, Orange
Range: Self-Reset, Latched
Default color
Green
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
PRODUCT SETUP
5
5-121