Settings - ABB Relion Technical Manual

1MRK 502 048-UUS A
13.5.5
13.5.6
13.5.7
Technical manual
Table 331: B16I Output signals
Name Type
OUT INTEGER

Settings

The function does not have any parameters available in local HMI or Protection and
Control IED Manager (PCM600)
Monitored data
Table 332: B16I Monitored data
Name Type
OUT INTEGER
Operation principle
The Boolean 16 to integer conversion function (B16I) will transfer a combination of up to
16 binary inputs INx, where 1≤x≤16, to an integer. Each INx represents a value according
to the table below from 0 to 32768. This follows the general formula: INx = 2
1≤x≤16. The sum of all the values on the activated INx will be available on the output
OUT as a sum of the integer values of all the inputs INx that are activated. OUT is an
integer. When all INx (where 1≤x≤16) are activated, that is = Boolean 1, it corresponds to
that integer 65535 is available on the output OUT. The B16I function is designed for
receiving up to 16 booleans input locally. If the BLOCK input is activated, it will freeze
the output at the last value.
Values of each of the different OUTx from function block B16I for 1≤x≤16.
The sum of the value on each INx corresponds to the integer presented on the output OUT
on the function block B16I
Name of input Type
IN1 BOOLEAN
IN2 BOOLEAN
IN3 BOOLEAN
IN4 BOOLEAN
IN5 BOOLEAN
IN6 BOOLEAN
Table continues on next page
Description
Output value
Values (Range) Unit
- -
Default Description
0 Input 1
0 Input 2
0 Input 3
0 Input 4
0 Input 5
0 Input 6
Section 13
Logic
Description
Output value
x-1
where
Value when Value when
activated deactivated
1 0
2 0
4 0
8 0
16 0
32 0
491