Authority Management Authman - ABB Relion Technical Manual

Section 17
Basic IED functions
17.13
17.13.1
17.13.2
700
If one or more users are created with the IED User Management and written to the IED,
then, when a user attempts a Log on by pressing the
perform an operation that is password protected, the Log on window opens.
The cursor is focused on the User identity field, so upon pressing the
change the user name, by browsing the list of users, with the "up" and "down" arrows.
After choosing the right user name, the user must press the
to password, upon pressing the
"✳✳✳✳✳✳✳✳". The user must scroll for every letter in the password. After all the letters
are introduced (passwords are case sensitive) choose OK and press the
At successful Log on, the local HMI shows the new user name in the status bar at the
bottom of the LCD. If the Log on is OK, when required to change for example a password
protected setting, the local HMI returns to the actual setting folder. If the Log on has failed,
an "Error Access Denied" message opens. If a user enters an incorrect password three
times, that user will be blocked for ten minutes before a new attempt to log in can be
performed. The user will be blocked from logging in, both from the local HMI and
PCM600. However, other users are to log in during this period.

Authority management AUTHMAN

Identification
Function description
Authority management
AUTHMAN
This function enables/disables the maintenance menu. It also controls the maintenance
menu log on time out.
key or when the user attempts to
key, the following characters will show up:
IEC 61850 IEC 60617
identification identification
AUTHMAN -
1MRK 502 048-UUS A
key, one can
key again. When it comes
key again.
ANSI/IEEE C37.2
device number
-
Technical manual