Setting Parameters - ABB Relion Technical Manual

Section 16
Station communication
16.10.4
16.11
16.11.1
16.11.2
Table 484: ACTIVLOG Non group settings (basic)
Name Values (Range)
ExtLogSrv1Type Disabled
ExtLogSrv1Type
SYSLOG TCP/IP
CEF TCP/IP
ExtLogSrv1Port 1 - 65535
ExtLogSrv1IP 0 - 18
ExtLogSrv2Type Disabled
ExtLogSrv1Type
SYSLOG TCP/IP
CEF TCP/IP
ExtLogSrv2Port 1 - 65535
ExtLogSrv2IP 0 - 18
Table continues on next page
658
Table 483: PRPSTATUS Output signals
Name Type
LAN1-A BOOLEAN
LAN1-B BOOLEAN

Setting parameters

The PRPSTATUS function has no user settings.
However, the redundant communication is configured in the LHMI under Main menu/
Configuration/Communication/TCP-IP configuration/ETHLAN1_AB where
Operation mode, IPAddress and IPMask are configured.
Activity logging parameters ACTIVLOG
Activity logging ACTIVLOG
ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be configured
with IP address; IP port number and protocol format. The format can be either syslog
(RFC 5424) or Common Event Format (CEF) from ArcSight.
Settings
Unit Step
- -
- 1
IP 1
Address
- -
- 1
IP 1
Address
Description
LAN1 channel A status
LAN1 channel B status
Default Description
Disabled External log server 1 type
514 External log server 1 port number
127.0.0.1 External log server 1 IP-address
Disabled External log server 2 type
514 External log server 2 port number
127.0.0.1 External log server 2 IP-address
1MRK 502 048-UUS A
Technical manual