Application Macros - ABB ACS550 User Manual

ACS550 User's Manual

Application macros

Macros change a group of parameters to new, predefined values. Use macros to
minimize the need for manual editing of parameters. Selecting a macro sets all other
parameters to their default values, except:
• Group 99: START-UP DATA
• 1602
• 1607
• 3018
• 9802
• Group 50: ENCODER
• Group 29: MAINTENANCE TRIG
After selecting a macro, you can make additional parameter changes manually with
the control panel.
You enable application macros by setting the value for parameter
MACRO
The following sections describe each of the application macros and provide a
connection example for each macro.
The last section in this chapter,
parameters that the macros change and the default values established by each
macro.
PARAMETER LOCK
PARAM SAVE
and
COMM FAULT FUNC
COMM PROT SEL
...
. By default, 1,
ABB STANDARD
parameters (except parameter 9904)
3019
COMM FAULT TIME
Group 53: EFB PROTOCOL
parameters.
, is the enabled macro.
Macro default values for
parameters
9902
APPLIC
parameters, lists the
Application macros
71