NEC UNIVERGE SV8100 Features & Specifications Manual page 675

UNIVERGE SV8100
Program
Number
15-07-01
20-06-01
20-10-06
31-02-01
31-02-02
31-03-01
.
For additional programming information on Paging, refer to the
Meet Me Paging Transfer
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
Internal Paging Group
Assignment – Internal Paging
Group Number
Internal Paging Group
Assignment – Internal All Call
Paging Receiving
Internal Paging Group Settings –
Internal Paging Group Name
Description/Comments
Assign function keys for External
Zone Paging (code 19 + zone),
External All Call Paging (code 20),
Internal Zone Paging (code 21 +
zone) or Meet Me Conference/
Paging Pickup (code 23).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to use Meet-Me
Conference and Paging.
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
Allow or prevent All Call Internal
Paging for each extension. If
allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented,
extensions can only make (not
receive) All Call Internal Paging
announcements. If combined,
Paging zones should be restricted
as well, change the internal page
zone group in Program 31-07-01
to 0.
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone display.
Paging, External and
Issue 5.0
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station
0 = Off
1 = On
(default = 0)
Up to 12 characters
Refer to table in
Programming Manual.
Paging, Internal features.
1 - 665