NEC UNIVERGE SV8100 Features & Specifications Manual page 827

UNIVERGE SV8100
F-Route
Program
Number
11-01-01
14-05-01
44-01-01
44-02-01
44-02-02
Q-Sig
Program Name
System Numbering
Trunk Group – Trunk Group
Number
System Options for F-Route – F-
Route Time Schedule
Dial Analysis Table for F-Route
Access – Dial
Dial Analysis Table for F-Route
Access – Service Type
Description/Comments
Set the system internal (Intercom)
numbering plan. The numbering
plan assigns the first and second
digits dialed and affects the digits
an extension user must dial to
access other extensions and
features, such as service codes
and trunk codes. If the default
numbering plan does not meet the
site requirements, use this
program to tailor the system
numbering to the site.
Program trunks of the same carrier
type into the same trunk group.
Select whether the F-Route
feature should use the time
schedule (0=not used, 1=used). If
this option is set to 0, the F-Route
table selected is determined only
by the digits dialed without any
relation to the day or time of the
call. If this option is set to 1, the
system first refers to Program
44-10. If there is a match, the
pattern defined in that program is
used. If not, the F-Route pattern in
Program 44-09 and time setting in
Program 44-08 are used.
Set the Dial digits for the
Pre-Transaction Table for
selecting F-Route (eight digits
*
#
max: 1~9, 0 , @). To enter a
wild card/don't care digit, press
Line Key 1 to enter an @ symbol.
Set the Service Type (0~3) for the
Pre-Transaction Table for
selecting F-Route.
Issue 5.0
Assigned Data
Refer to SV8100
Programming Manual
for a detailed
description of this
program.
Trunks 1-200
Trunk Group 1-100
Priority - 1-200
(default = All trunks in
Trunk Group 1 with
priorities of:
Trunk 1 = Priority 1
Trunk 2 = Priority 2
Trunk 200 = Priority
200)
0 = Not Used
1 = Used
(default = 0)
Up to eight digits
(Use line key 1 for a
'Don't Care' digit, @)
(default not assigned)
0 = No Setting (None)
1 = Extension Call
(Own)
2 = F-Route Table (F-
Route)
3 = Dial Extension
Analyze Table (Option)
(default = 0)
1 - 817