NEC UNIVERGE SV8100 Features & Specifications Manual page 328

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Access Code

+ the trunk number (default 805). You can optionally go back to step 2 to add more parties to your Conference.

When called party answers, press the Conf softkey or Conf twice.

If you cannot add additional parties to your Conference, you have exceeded the system Conference limit.

If the call being added is busy/unanswered:

With an outside call, press the line or Call Appearance (CAP) key for a call previously added to the Conference.

The unanswered call drops and the initiator is back into the Conference call.

Adding an Intercom call to an outside Conference call: Press the Conf softkey on the Multiline Terminal display

or Conf twice to re-establish the Conference. If using a non-display telephone, press Conf twice.

With only Intercom calls in the Conference: Press Conf twice to re-establish the Conference. If the voice mail

answers, there is no way to drop that extension out. You must drop the Conference call.

Repeat steps 2~4 to add more parties.

UNIVERGE SV8100

Show Quick Links

Table of Contents