Issue 5.0
Guide to Feature Programming
Program
Number
90-02-01
90-02-02
90-02-03
Troubleshooting
The table below shows possible Error messages and Causes:
Error Message
VMDB is not attached
1 - 1146
Program Name
Programming Password Setup –
User Name
Programming Password Setup –
Password
Programming Password Setup –
User Level
Table 1-30 Error Messages and Causes
The PZ-VM21 is not attached.
Description/Comments
Set the system passwords.
Configure the administrator
accounts that are used when
connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the
accounts that are used to connect.
If using WebPro, these are the
accounts that are used to login.
.
If calls are answered by an
Auto attendant first, instead
of the DIL setup on Program
22-01 and Program 22-07,
set the transfer destination in
the Auto Attendant to the
Modem Access Service
Code.
Set the system password user
levels.
Voice Response System (VRS) Upload Download Audio
UNIVERGE SV8100
Assigned Data
Maximum 10
characters
Refer to the SV8100
Programming Manual
for default settings.
Up to eight digits.
Refer to the SV8100
Programming Manual
for default settings.
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Refer to the SV8100
Programming Manual
for default settings.
Cause