NEC UNIVERGE SV8100 Features & Specifications Manual page 579

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
11-12-30
11-12-33
11-12-34
14-01-16
14-07-01
Hold
Program Name
Service Code Setup (for Service
Access) – Specified Trunk
Answer
Service Code Setup (for Service
Access) – Group Hold
Service Code Setup (for Service
Access) – Answer for Group
Hold
Basic Trunk Data Setup – Forced
Release of Held Call
Trunk Access Map Setup
Description/Comments
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
Enable (1) or disable (0) Forced
Release of Held Call.
Set up the Trunk Access Maps.
This sets the access options for
trunks.
Issue 5.0
Assigned Data
MLT, SLT
(default = 772)
MLT, SLT
(default = 832)
MLT, SLT
(default = 862)
0 = Disable
1 = Enable
(default = 0)
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
1 - 569