NEC UNIVERGE SV8100 Features & Specifications Manual page 487

UNIVERGE SV8100
The maximum number of Embedded VRS ports is 1
If a VM21 card is installed, the embedded VRS is not available
Conditions
Before Embedded VRS is functional it is necessary to install the required prompts. These are
available either via the Technical DVD or the Software Database on BusinessNet.
They are installed as follows:
1. Unzip the prompts for your selected language
2. Copy the contents of the unzipped folder to the root of a USB stick
3. Insert the USB stick into the USB port of the CPU
4. Power down system
5. Withe 'loadsw' pressed, re-apply power
6. When middle 3 leds under USB port flash simultaneously, power down system
7. Remove USB stick and re-apply power to system
8. When system has restarted, set command 40-07-01 to selected language of installed
prompts and ensure langauge is also set in command 47-16 as one of available licensed
languages.
Default Setting
Disabled
System Availability
Terminals
Not applicable
Required Component(s)
CD-CP00
Embedded VRS
Issue 5.0
1 - 477