NEC UNIVERGE SV8100 Features & Specifications Manual page 237

UNIVERGE SV8100
Program
Number
13-04-05
14-01-27
15-07-01
20-07-24
20-07-25
40-10-06
The Caller ID – Flexible Ringing Flowchart below helps define programming:
Caller ID – Flexible Ringing
Program Name
Speed Dialing Number and Name
– Incoming Ring Pattern
Basic Trunk Data Setup – Caller
ID Refuse Setup
Programmable Function Keys
Class of Service Options
(Administrator Level) – Set/
Cancel Private Call Refuse
Class of Service Options
(Administrator Level) – Set/
Cancel Caller ID Refuse
Voice Announcement Service
Option – Set VRS Message for
Private Call Refuse (VRS Msg
Private Call)
Description/Comments
Define the ring tone for the caller
ID routed call.
Define if the trunk will reject the
call by playing the VRS message
based on the Caller ID
information.
Assign function key 86 (Set
Private Call Refuse) to Enable/
Disable trunks which are set in
Program 14-01-27 to "1".
Assign function key 87 (Set Caller
ID Refuse) to Enable/Disable the
Caller ID Refusal (trunks) which is
set in Program 14-01-27 to "1".
Enable (1) or Disable (0) an
extension user ability to set or
cancel Private Call Refuse.
Enable/Disable an extension
ability to set or cancel Caller ID
Refuse.
Assign the VRS Message number
used as Private Call Refuse.
When Fixed message is set, VRS
message guidance is: Service
finished. Disconnect the line,
please.
Issue 5.0
Assigned Data
Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern
(1~4)
5 ~ 9 = Scale Pattern
(1~5)
(default = 0)
0 = Disable (No)
1 = Internal Dial
2 = Enable (Yes)
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
1 - 227