NEC UNIVERGE SV8100 Features & Specifications Manual page 921

UNIVERGE SV8100
Program
Number
13-02-01
13-03-01
13-04-01
13-04-02
13-04-03
13-04-04
13-04-05
Speed Dial – System/Group/Station
Program Name
Group Speed Dialing Bins
Speed Dialing Group
Assignment for Extensions
Speed Dialing Number and Name
– Speed Dialing Data
Speed Dialing Number and Name
– Name
Speed Dialing Number and Name
– Transfer Mode
Speed Dialing Number and Name
– Transfer Destination Number
Speed Dialing Number and Name
– Incoming Ring Pattern
Description/Comments
Designates the starting bin
number the system uses for Group
Speed Dialing.
For Group Speed Dialing, assign
extensions to Speed Dialing
groups (1~64).
Enter the System and Group
Speed Dialing numbers and
names.
Assign a name to each System
Speed Dial bin.
When the incoming caller ID
matches the number programmed
in the speed dial bin, this setting
determines the destination of the
call.
When the incoming caller ID
matches the number programmed
in the speed dial bin, this setting
determines the destination of the
call.
Define the ring tone for the caller
ID routed call.
Issue 5.0
Assigned Data
01~64
(default not assigned)
01~64
(default = 1)
*
#
1~9, 0, ,
Pause (Press line key
1)
Recall/Flash (Press
line key 2)
@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
Maximum 12
Characters (Use dial
pad to enter name)
(default not assigned)
0 = Not Used
1 = Internal Dial
2 = Incoming Ring
Group (IRG)
(default = 0)
If Transfer mode is
(Refer to 13-04-03):
1 = Internal Dial Mode
*
#
1~9, 0, , , P, R, @
(Maximum 24
Characters)
2 = Incoming Ring
Group
0 ~ 100 (IRG Number)
P=Pause R=Recall
@= Additional Digits
when using ISDN
functionality
(default not assigned)
Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern
(1~4)
5 ~ 9 = Scale Pattern
(1~5)
(default = 0)
1 - 911