NEC UNIVERGE SV8100 Features & Specifications Manual page 929

UNIVERGE SV8100
Program
Number
80-04-08
80-04-09
Operation
To store an Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 853 (for system) or 854 (for group).
3. Dial system or group storage code.
Initially, there are 1000 System Speed Dialing codes. There are Group Speed Dialing codes only if you define
.
them in programming.
4. Dial telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and
.
Enter @ for await answer before sending following digits on ISDN.
.
5. Press Hold.
6. Enter the name associated with the Speed Dialing number.
Speed Dial – System/Group/Station
Program Name
Call Progress Tone Detector
Setup – OFF minimum time
Call Progress Tone Detector
Setup – OFF maximum time
*
. To enter a pause, press Transfer. To store a Flash, press Recall.
Description/Comments
Use to define the off minimum time
for the Call Progress Tone
Detector.
Use to define the off maximum
time for the Call Progress Tone
Detector.
Issue 5.0
Assigned Data
1~255 (30+30-
7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 9
(300ms)
Type 3 (RBT) – 83
(2520ms)
Type 4, Type 5 – 0
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 14
(450ms)
Type 3 (RBT) – 115
(3480ms)
Type 4, Type 5 – 0
1 - 919