Continued Dialing - NEC UNIVERGE SV8100 Features & Specifications Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

UNIVERGE SV8100

Continued Dialing allows an extension user to dial a call, wait for the called party to answer and then dial

additional digits. This helps users that need services like Voice Mail, automatic banking and Other

Common Carriers (OCCs).

There are two types of Continued Dialing:

Continued Dialing for Intercom Calls

Depending on an extension Class of Service, a multiline terminal user may be able to dial additional

digits after their Intercom call connects. In systems with Voice Mail, for example, Continued Dialing lets

extension users dial the different options after the Voice Mail answers. Without Continued Dialing,

extension users cannot access these Voice Mail options.

Continued Dialing for Trunk Calls

Continued Dialing gives a user access to outside services like automatic banking, an outside Automated

Attendant, bulletin boards and Other Common Carriers (OCCs). After the outside service answers, the

user can dial digits for whatever options the services allow. Without Continued Dialing, the system Toll

Restriction cuts off the call after a specific number of dialed digits. See Programming below for

additional information.

Continued Dialing may make the system more susceptible to toll fraud.

The ability to use Continued Dialing on trunk calls is set by Toll Restriction programming.

Continued Dialing for intercom calls only applies to calls made to analog type devices.

With Pulse to Tone Conversion, users can place calls to services over Dial Pulse

and then dial DTMF digits after the service answers.

Default Setting

Continued Dialing

Show Quick Links

Table of Contents