NEC UNIVERGE SV8100 Features & Specifications Manual page 264

Issue 5.0
Operation
To place a call over a trunk group:
1. Go off-hook.
2. Dial 804.
3. Dial trunk group number (001~100).
4. Dial the number.
- OR -
1. At the multiline terminal, press the trunk group key (Program 15-07-01 or SC 851: *02 + group).
2. Dial the number.
To place a call using Trunk Group Routing:
1. Go off-hook.
2. Dial 9.
If your system has an Alternate Trunk Route Access code, you may dial that instead.
.
3. Dial the number.
- OR -
1. At the multiline terminal, press the Trunk Group Routing key (Program 15-07-01 or SC 852: *02
plus trunk group).
2. Dial the number.
To place a call over a specific trunk:
1. Dial 805.
2. Dial the line number (e.g., 005 for line 5).
3. Dial the number.
- OR -
1. At the multiline terminal, press line key (Program 15-07-01 or SC 852: *01 001 to 200).
2. Dial the number.
To busy out a trunk from outbound usage:
1. Press Speaker + 745 + Trunk Number (001~200) + 1.
The user which busied out the trunk still has access to it. All other users are blocked from seizing it to place an
.
outgoing call. The trunk, however, can still be answered by any user programmed with the trunk access.
1 - 254
UNIVERGE SV8100
Central Office Calls, Placing