NEC UNIVERGE SV8100 Features & Specifications Manual page 273

UNIVERGE SV8100
Program
Number
20-08-15
20-08-16
20-08-17
20-08-19
20-08-20
20-08-21
20-08-22
Class of Service
Program Name
Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
Description/Comments
Turn Off (0) or On (1) a user Class
of Service from automatically
blocking outgoing Caller ID
information when a call is placed.
If block is enabled, the system
automatically inserts the Caller ID
*
block code 67 (defined in
Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled).
If block is disabled, the system
outdials the call just as it was
dialed by the user.
Turn off or on an extension ability
to display the name and number of
the extension that dialed 911.
Turn off or on an extension user
ability to override the trunk access
map programming for outgoing
calls.
Turn off or on an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
Turn On (1) or Off (0) the ability of
an extension to make a call by just
dialing the number without first
going off hook.
Used to enable or disable the
ability to access trunks when
going off hook by pressing the
speaker key for each Class of
Service.
Used to enable or disable the
ability to make voice over to a
busy virtual extension for each
Class of Service.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
1 - 263