NEC UNIVERGE SV8100 Features & Specifications Manual page 404

Issue 5.0
Program
Number
20-09-01
20-13-23
21-01-02
22-01-06
22-02-01
1 - 394
Program Name
Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
System Options for Outgoing
Calls – Intercom Interdigit Time
System Options for Incoming
Calls – DID Ring-No-Answer
Time
Incoming Call Trunk Setup
Description/Comments
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
. With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Select whether an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
Set the time-out interval for DID
callers that do not dial. After this
time, the DID call routes according
to Vacant Number Intercept
programming.
Set the DID Ring No Answer
(RNA) Intercept time (0~64800
seconds). In systems with RNA
Intercept, the DID call rings the
destination extension for this time,
and then rings Intercept Ring
Group. (default: 20).
For each Night Service Mode,
enter service type 3 when the
trunk should be a DID trunk.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 20 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Direct Inward Dialing (DID)