Connecting To Su-5M/6M - Mitsubishi Electric GOT2000 Connection Manual

7.5.2

Connecting to SU-5M/6M


Communication settings
Make the following settings using the programmer
system parameter setting.
Item
Protocol CCM
Response delay time 0ms
800ms/960ms/1200ms/1600ms/4000ms/
Timeout Time
8000ms/16000ms/40000ms
Station No. 1 to 90
Transmission mode HEX
Stop bit 1bit, 2bits
Data bit 8bits (Fixed)
Parity NONE, ODD, EVEN
*1
9600bps, 19200bps, 38400bps
Transmission speed
*1 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
7.5.3 Connecting to DirectLOGIC 05
series or DirectLOGIC 06
series

Communication settings
Make the following settings using the programmer
system parameter setting.
Item
Protocol CCM NET (DirectNET)
Timeout 780ms or more
RTS On Delay Time
0ms
RTS Off Delay Time
0ms
Station No. 1 to 90
*2
9600bps, 19200bps, 38400bps
Transmission speed
Stop bit 1bit, 2bits
Parity NONE, ODD, EVEN
Communication format HEX
*1 To use a PLC with multidrop, set the "RTS on delay time" to
5ms or more and the "RTS off delay time" to 2ms or more.
*2 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
7 - 24
7. CONNECTION TO KOYO EI PLC
7.5 PLC Side Setting
Set value
Set value
*1
*1
7.5.4 Connecting to DirectLOGIC
205 series

Communication settings
Make the following settings using the programmer
system parameter setting.
Item
Protocol CCM NET (DirectNET)
Station No. 1 to 90
*1
9600bps, 19200bps, 38400bps
Transmission speed
Data bit 8bits (Fixed)
Stop bit 1bit (Fixed)
Parity NONE, ODD
Self-diagnostic mode OFF
Response delay time 0ms
Peer to Peer OFF
Master/Slave Slave
Timeout Enable
Transmission mode HEX
MODBUS OFF
*1 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
7.5.5 Connecting to PZ Series

Communication settings
Make the following settings using the programmer
system parameter setting.
Item
Protocol CCM NET
800ms/960ms/1200ms/1600ms/4000ms/
Timeout
8000ms/16000ms/40000ms
Response delay time 0ms
Station No. 1 to 90
Communication format HEX
*1
9600bps, 19200bps, 38400bps
Transmission speed
Stop bit 1bit
Parity NONE, ODD
*1 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
Set value
Set value