1.6.2
Confirming the communication state on the GOT side (For Ethernet
connection)
Confirming the communication state on Windows
(1) When using the Command Prompt of Windows
Execute a Ping command at the Command Prompt of Windows
(a) When normal communication
C:\>Ping 192.168.3.18
Reply from 192.168.3.18: bytes=32 time<1ms TTL=64
(b) When abnormal communication
C:\>Ping 192.168.3.18
Request timed out.
(2) When using the [PING Test] of GT Designer3
Select [Communication]
2.
(3) When abnormal communication
At abnormal communication, check the followings and execute the Ping command again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of [Communication Settings]
• IP address of GOT specified by Ping command
®
[Communication configuration]
Click!
1.
1. PREPARATORY PROCEDURES FOR MONITORING
®
, GT Designer3
®
.
[Ethernet] and
[Connection Test].
1.
Specify the [GOT IP Address] of the [PING
Test] and click the [PING Test] button.
2.
The [Test Result] is displayed after the [PING
Test] is finished.
1.6 Checking for Normal Monitoring
1
1 - 27