Programmable Output Relay K4, Terminals 12, 13 And 14; Programmable Output Relay K5, Terminals 15, 16 And 17 - ABB PST30 Installation And Commissioning Manual

Chapter 5
Connection
Figure 24: Terminals 12, 13, 14
Figure 25: Terminals 15, 16, 17
1. . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 26: Tightening torques and cable dimensions (1 mm=0.0394 in)
52
5:2.2.5 Programmable output relay K4,
terminals 12, 13, and 14
The output relay gives signal depending on the selected
function.
Default: Run
See Chapter 7 "Settings and configuration" for programming.
1. Connect the cables to terminal 12, 13, and 14.
5:2.2.6 Programmable output relay K5,
terminals 15, 16, and 17
The output relay gives signal depending on the selected
function.
Default: Top of ramp
See Chapter 7 "Settings and configuration" for programming.
Connect the cables to terminal 15, 16, and 17.
M3
0,5 Nm - 4,3 lb.in
3,5x0,6
0,14 ... 2,5 mm 2
AWG 12 ... 22
0,14 ... 2,5 mm 2
1SFC132003M0201