1SFC132003M0201
Stop–A
The motor will stop and an automatic reset is
performed.
Press Store to save the selected operation.
Thyristor short circuit fault, type of operation
(SCR SC Op)
Select what operation shall be asserted if a fault occurs with
shorted thyristor:
Stop–M
The motor will stop and a manual reset is
required.
Stop–A
The motor will stop and an automatic reset is
performed.
Press Store to save the selected operation.
By-pass doesn't open, type of operation
(BP Closed Op)
Select what operation shall be asserted if the contactor does
not open:
Stop–M
The motor will stop and a manual reset is
required.
Stop–A
The motor will stop and an automatic reset is
performed.
Press Store to save the selected operation.
By-pass doesn't close, type of operation
(BP Open Op)
Select what operation shall be asserted if the contactor does
not close:
Stop–M
The motor will stop and a manual reset is
required.
Stop–A
The motor will stop and an automatic reset is
performed.
Press Store to save the selected operation.
Connection fault, Non conduction thyristor
fault, Line side fault, Kick-current fault, and
Internal fault
Selected operation for the faults listed above is always:
Stop-M
The motor will stop and a manual reset is
required.
Chapter 7
Settings and configuration
103