Mounting The Front Rollers - Toro 04383 Operator's Manual

Traction unit

Hide thumbs Also See for 04383:

Operator's manual (52 pages)

Operator's manual (44 pages)

Operator's manual (40 pages)

Table Of Contents

Table of Contents

Warning

CALIFORNIA

Proposition 65 Warning

Battery posts, terminals, and related

accessories contain lead and lead compounds,

chemicals known to the State of California

to cause cancer and reproductive harm.

Wash hands after handling.

Battery terminals or metal tools could short

against metal tractor components causing

sparks. Sparks can cause the battery gasses to

explode, resulting in personal injury.

• When removing or installing the battery, do

not allow the battery terminals to touch any

metal parts of the tractor.

• Do not allow metal tools to short between

the battery terminals and metal parts of the

tractor.

2. Connect the positive battery cable (red) from the

starter solenoid to the positive post (+) of the battery

(Figure 8). Secure it with a wrench and coat the

terminal with petroleum jelly. Make sure the cable

will clear the seat, in the rear-most position, which

could cause wear or damage to the cable.

1. Negative (-)

3. Connect the black ground cable to the negative (-)

post of the battery. Secure it with a wrench and coat

the terminal with petroleum jelly.

Figure 8

2. Positive (+)

Incorrect battery cable routing could damage

the tractor and cables causing sparks. Sparks

can cause the battery gasses to explode,

resulting in personal injury.

• Always disconnect the negative (black)

battery cable before disconnecting the

positive (red) cable.

• Always connect the positive (red) battery

cable before connecting the negative (black)

cable.

4. Place the terminal covers over the battery posts.

5. Install the battery clamp and covers and secure them

with the wing nuts.