Adding Rear Ballast; Install Decals; Reading The Manuals And Viewing The Training Materials - Toro 04383 Operator's Manual

10

Adding Rear Ballast

Parts needed for this procedure:
40 lb Calcium chloride (purchase separately)
Procedure
This unit complies with the ANSI B71.4-2004 Standard
when 40 lb of calcium chloride ballast is added to the
rear wheel.
Important: If a puncture occurs in a tire with
calcium chloride, remove the unit from the turf area
as quickly as possible. To prevent possible damage
to the turf, immediately soak the affected area with
water.
11

Install Decals

Parts needed for this procedure:
1 Warning decal
1 Danger decal
Procedure
1. Affix the warning decal over English warning decal
(104–2053) for CE compliance.
2. Affix the danger decals over English danger decals
(104–7728) for CE compliance.
12
Reading the Manuals and
Viewing the Training Materials
Parts needed for this procedure:
2 Operator's Manual (traction unit)
1 Engine Operator's Manual (engine)
1 Parts Catalog
1 Operator Training Materials
1 Pre-delivery Inspection Sheet
1 Noise rating certificate
1 Certificate of compliance
2 Ignition keys
Procedure
1. Read the manuals.
2. View the Operator Training Materials.
3. Store the documentation in a safe place.
22