Table of Contents
Advertisement
12.4 LEDs
12.4.1 Light emitting diode
"LED1" (red)
12.4.2 Light emitting diode
"LED2" (green)
12.4.3 Light emitting diode
"LED3" (red)
12.5 DIP switch blocks
L240/BS
The LEDs on Evaluation Module L240/BS have the following functions:
"LED1" is without function.
Green "LED2" indicates communication between Evaluation Module
L240/BS and a connected wall reader, strike plate or door cylinder (lights up
for about 6 seconds), when a chipkey is inserted or a keypad code is
entered.
LED off: Normal operation
LED on: Entry of a keypad code/ insertion of a chip key
LED3 is without function.
Various settings can be predefined using the three DIP switch blocks
"Function switch 1", "Function switch 2" and "Address switch 3". Further
settings are undertaken in the programming level using Keypad L240/PT.
Switch position in "OFF"
"ON"
85
Advertisement
Table of Contents
