Table of Contents
Advertisement
Submenu
"5=Key/Code"
7.1.6
Menu 6 "Printer"
Engineer-PIN
1 = Time/Date
2 = Tamp.Reset
3 = Test
4 = Change PIN
5 = Printer
6 = Service
7 = Remote
8 = Edit
9 = Cct Off
Submenu
"1=Service Date"
Submenu
"2=Service Num"
Operation by the Engineer
In submenu "5=Key/Code" the authorizations (e.g. access,
setting/unsetting) for the keypad code or chips key and the Evaluation
Module L240/BS can be printed out. This module is only available if at least
one Evaluation Module L240/BS is registered. Further information relating to
printing can be found in the product manual "SafeKey Evaluation Module
L240/BS".
Menu item "6=Service": In the service menu, the dates and telephone
number of the Engineer/Installer for the next maintenance/inspection can be
entered. The service display has an influence on the function of the Intrusion
Alarm System.
1=Service Date
2=Service Num
On the corresponding day the stored service telephone number appears on
the display:
Service Num
0815/4711
The service note is no longer displayed on the following day or after an
Engineer code is entered.
In submenu "1=Service Date set to" the service date can be entered by
pressing the button.
Serv.Date set to
Mon 20 Okt 2008
In submenu "2=Service Tel." the service telephone number of the
Engineer/Installer can be entered.
Service Num
0
40
Advertisement
Table of Contents
