Security technology software win-pc for intrusion alarm panel (20 pages)
Summary of Contents for ABB M2303
Page 1
VER:1.0 │ │ 22.04.2015 ABB-Welcome Pos : 2 /Di nA4 - Anleitung en Online/Inhalt/KN X/D oorEntr y/83220- AP- xxx/Titelbl att - 83220-AP- xxx - ABB @ 19\mod_1323249806476_15.doc x @ 111084 @ @ 1 M2303 Guard Unit === Ende der Liste für T extmar ke Cover ===...
Pos : 4 /Busch-J aeger (Neus truktur)/M odul-Str uktur/Online-Dokumentation/Inhal ts verz eic hnis (--> Für alle D okumente <--)/Inhalts verz eichnis @ 19\mod_1320649044386_15.doc x @ 109653 @ @ 1 Safety ......................4 Intended use ....................4 Environment ....................4 ABB devices ................. 5 Operation ....................... 6 Standard operation ............... 6 4.1.1 Control elements ................
Page 3
ABB-Welcome Cleaning ..................64 Adjusting the device..............65 Technical data ..................... 66 Mounting / Installation .................. 68 Requirements for the electrician ..........68 General installation instructions ..........69 Mounting ..................71 === Ende der Liste für T extmar ke TOC ===...
Pos : 9 /Di nA4 - Anleitung en Online/Inhalt/KN X/D oorEntr y/83220- AP- xxx/Besti mmungsg emaess er Gebrauch - 83220-AP- xxx- 500 @ 20\mod_1324561168699_15.doc x @ 112728 @ @ 1 The M2303 is an integral part of the ABB Welcome door communication system and operates exclusively with components from this system.
ABB devices Pos : 13 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/U mwel t (--> Für alle D okumente <--)/Hinweis e/Hi nweis - U mwelt - ABB El ektr ogeräte @ 19\mod_1323162745839_15.doc x @ 110867 @ @ 1 All packaging materials and devices from ABB bear the markings and test seals for proper disposal.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 18 /DinA4 - Anl eitungen Onli ne/Ueberschriften/1./Bedi enung @ 18\mod_1302613924165_15.doc x @ 103365 @ 1 @ 1 Operation Pos : 19 /DinA4 - Anl eitungen Onli ne/Ueberschriften/2./Nor maler Betrieb @ 18\mod_1302768820965_15.doc x @ 103540 @ 2 @ 1 Standard operation Pos : 20 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Bedi enel emente @ 20\mod_1323260220559_15.doc x @ 111647 @ 3 @ 1...
Page 7
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Fig. 1 Over view of the control buttons — 7 —...
Page 8
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. — 8 —...
Page 9
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Function Handset When a call is coming, pick up handset to activate the communication within 30 seconds and hang up handset to end the call.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.1.2 Welcome screen and status bar START 2013/01/01 00:00 12 13 Fig. 2 Start On the start page, the following functions are available:...
Page 11
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. existing actuators here. User list - Touch this button and then check the contact list. History - Press this button to enter the history menu. All events and alarms from indoor stations can be found here.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 26 /DinA4 - Anl eitungen Onli ne/Ueberschriften/2./Bedi enaktionen @ 20\mod_1323262294281_15.doc x @ 111911 @ 2 @ 1 Control actions Pos : 27 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Sprec h- und Videover bindung @ 20\mod_1323262368700_15.doc x @ 111927 @ 3 @ 1...
Page 13
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Snapshot - Press this button to take a snapshot. Display settings - Press this button to enter the display settings. End the connection.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 30 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Tuer oeffnen @ 20\mod_1323263277453_15.doc x @ 111935 @ 3 @ 1 4.2.2 Display settings during calls Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.3 Intercept mode Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1...
Page 16
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to set the VIPs. Choose the type of intercept by ticking the checkbox - “Permanent” mode and “Repeat” mode are available.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.3.1 VIP settings Set VIP Press to set the VIPs,. A total of 64 entries can be added. VIP SETTING User Name...
Page 18
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press the “VIP” button to check the VIP list . “Add” - Press the “Add” button to add new VIPs.
Page 19
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. VIP list - Displays all VIPs. “View” - Press this button to display specific information of the selected VIP. “Delete” - Press this button twice to delete the selected VIP.
Page 20
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to add a new VIP. Enter the correct physical address before pressing this button. “Back” - Press this button to return to the VIP settings menu.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.4 Communication Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1...
Page 22
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. “Call” - Press this button to make a call after you enter the number. “Back” - Press this button to return to the start page.
Page 23
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. CALL GUARD UNIT Call Back Fig. 10 Call guard unit The “Call guard unit” menu has the following functions: Functions Click on the “Call guard unit.
Page 24
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to return to the start page. — 24 —...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.5 Surveillance Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.6 Switch actuator Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.7 User list Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1 SWITCH ACTUATOR Alexander.G...
Page 28
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. “Back” - Press this button to return to the start page. — 28 —...
Page 29
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Press the “View” button to show specific information from the contact list. CONTACT User Name Alexander.G Logic Address 00000301 Physical Address...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.8 History Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1...
Page 31
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. means receiving calls means missing calls “Delete” - Press this button to delete the selected call from the history. “Call” - Press this button to call back the selected call from the indoor station.
Page 32
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Press the “OK” button to view specific information. Outdoor 1 Delete Back Fig. 16 Specific history information Functions Press the “Plus / Minus“ button to view the previous or the next photo.
Page 33
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. ALARM HISTORY 1/15 2013-03-21 Indoor 16:45 01-003 2013-03-21 Outdoor 16:45 01-1 Outdoor 2013-03-21 Call 01-1 14:24 Back Fig. 17 Alarm history The “Alarm History”...
Page 34
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 32 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ür all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1 Pos : 33 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Stumm s chalten @ 20\mod_1323263607142_15.doc x @ 111951 @ 3 @ 1...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.9 Settings (Basic) Pos : 31 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/T uer oeffnen - 83220- AP- xxx @ 20\mod_1323267958479_15.doc x @ 112109 @ @ 1 4.2.9.1...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Press the “Plus / Minus” button to select a bell sound for calls coming from other guard units “OK” - Press this button to save the settings.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Fig. 19 Volume settings The “Volume” menu has the following functions: Functions “Ringtone volume” - Press the “Plus / Minus” button to set the volume of the bell sound.
Page 38
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. DATE AND TIME Date(YYYY-MM-DD) 2013 Time Summer Time √ Back Fig. 20 Date and time settings The “Date and time” menu has the following functions: Functions “Date”...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.9.4 Other settings OTHER SETTINGS Calibrate Auto Full Screeen × Auto-Snapshots √ Back Fig. 21 Other settings The “Other settings” menu has the following functions: Functions “Auto full screen”...
Page 40
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - If the buttons and the associated graphics on the display are no longer superimposed, the monitor must be calibrated. - Press the “calibrate" button and then confirm that the dialogue box is displayed.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.9.5 Language settings LANGUAGE English Française Italiano Español Português Česky Back Fig. 22 Language settings The “Language” menu has the following functions:...
Page 42
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. — 42 —...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.9.6 Information INFORMATION Flash Version: V1.00_131029 MCU Version: V1.01_131107 Guard Unit Add.: Master Default Outdoor: Back Fig. 23 System information Display the current version and the address of this guard unit (scanning the QR code to get the specific instructions for this guard unit) —...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10 Settings (Advanced) Enter the system password to access the advance settings. The default password is 345678. Enter Password to Access the Menu Back Fig.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.1 Switch actuator settings SWITCH ACTUATOR Actuator 1(001) Modify Delete Back Fig. 25 Switch actuator settings The “Switch actuator” menu has the following functions:...
Page 46
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. “Back” - Press this button to return to the start page. — 46 —...
Page 47
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Press the “Add” button to add a new actuator SWITCH ACTUATOR Relay actuator Rename Back Fig. 26 Switch actuator settings The “Add” button has the following functions:...
Page 48
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. — 48 —...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.2 Program button settings PROGRAM BUTTON Release 2nd-lock Button 1 Button 2 None Button 3 None Back Fig. 27 Program button settings The “Program button”...
Page 50
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to save the settings. “Back” - Press this button to return to the start page. — 50 —...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.3 User list management USER LIST MANAGEMENT User Name Logic Address Edit Back Fig. 28 User list management The “Program button” menu has the following functions: Functions “User name”...
Page 52
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to return to the start page. — 52 —...
Page 53
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Add a new contact list by user name: USER LIST MANAGEMENT Physical Address User Name Back Fig. 29 User name Press the “Add” button to add a new user name. The following functions are available: Functions Enter the physical address and user name when adding a new contact list.
Page 54
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Edit a contact list: USER LIST MANAGEMENT Alexander.G Modify Bodin.K Christian.G Delete Elizabeth.G Back Fig. 30 Editing a user name Edit the user name. The following functions are available:...
Page 55
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to return to the start page. — 55 —...
Page 56
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Add or edit a new contact list by logic address: USER LIST MANAGEMENT Physical Address Logic Address Back Fig. 31 User list management Edit or add a logic address.
Page 57
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. - Press this button to save the settings. “Back” - Press this button to return to the start page. — 57 —...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.4 Call code settings CALL CODE SETTING Code Type Physical Address Digit Back Fig. 32 Call code settings To the “Call code settings” menu has the following functions:...
Page 59
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. address by using the “Plus / Minus” buttons. (01-08 digits are available, and the digits of the logic address must be consistent with the ones set in the “user list management”...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.5 Password settings PASSWORD SETTING Enter New Password Enter Password Again Back Fig. 33 Password settings The “Password settings” menu has the following functions: Functions Enter a new system password.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.6 Reset factory default RESET FACTORY DEFAULT Are you sure to reset? Back Fig. 34 Reseting factory default To the “Reset factory default” menu has the following functions: Functions “OK”...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4.2.10.7 Reset Password & Clear All Data If you forget the system password, you should enter the engineer mode to reset the system password.
Page 63
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Reset Password Clear All Data Back Fig. 36 Resetting password & Clearing all data Pos : 67 /DinA4 - Anl eitungen Onli ne/Ueberschriften/2./Rei nigung @ 19\mod_1310733980533_15.doc x @ 107853 @ 2 @ 1...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Cleaning Pos : 68 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/Rei nigung/Rei nigung Touc hscreenmonitor @ 19\mod_1310734108978_15.doc x @ 107862 @ @ 1 Caution Risk of damage to the screen surface.
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 70 /DinA4 - Anl eitungen Onli ne/Ueberschriften/2./Geraeteei nstellungen @ 18\mod_1302768847744_15.doc x @ 103548 @ 2 @ 1 Adjusting the device Pos : 71 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Absc hlus s widerstand @ 19\mod_1321958079906_15.doc x @ 110083 @ 3 @ 1...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Only one guard unit in each building must be set as "Master" (Jumper should be as 'M/S on'). All other guard units in the same building must be set as "Slave"...
Page 67
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Protection IP 30 2 x 0.28 mm² – 2 x 1 mm² Single-wire clamps 2 x 0.28 mm² – 2 x 1 mm²...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 79 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Für alle D okumente <--)/1. Ebene/M - O/Montage / Installation @ 18\mod_1302613966111_15.doc x @ 103373 @ 1 @ 1 Mounting / Installation Pos : 80 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Sic herheit (-->...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Electric voltage! Install the device only if you have the necessary electrical engineering knowledge and experience. • Incorrect installation endangers your life and that of the user of the electrical system.
Page 70
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. • Do not use common cables for the connecting wires of the door openers and wires of the system bus. •...
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Pos : 84 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Für alle D okumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960458_15.doc x @ 103424 @ 2 @ 1 Mounting Pos : 85.1 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/DoorEntr y/83220-AP- xxx/M ontag e - M odul e/Montage - Montagedose -- 83220-AP- xxx @ 19\mod_1323250406848_15.doc x @ 111098 @ @ 1...
Page 72
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Installation size The bottom of the device has screw holes and thus can be fastened on the wall according to the above dimension instructions.
Page 73
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Wiring Fix the bottom of the device and connect it with reference to the figures. The insulated section of the cable end must not be longer than 10mm.
Page 74
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Mounted on the wall Affix the bottom of the device to the wall. Latch the upper part of the device onto its bottom part , place the upper side of the...
Page 75
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Mounted with flush-mounted box Affix the bottom of the device to the existing flush-mounted box. Latch the upper part of the device onto its bottom part: place the upper side of the device on the lock-in lugs and then press the bottom side onto the bottom part of the device until it is caught by the clamp.
Page 76
ABB-Welcome Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Fix the bottom of the device to the desktop bracket. Latch the upper part of the device onto its bottom part: place the upper side of the device on the lock-in lugs and then press the bottom side onto the bottom part of the device until it is caught by the clamp.
Page 77
We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or shortcoming in this document.