Table of Contents
Advertisement
9.2.2
Menu 05 – Text
9.2.3
Menu 01 – Edit
SafeKey
05
Buttons
for accessing the "Text" menu
Key/Code
Number _ _ _
Key/Code 1
Key/Code 1
Display of the text to be changed in the lower line (the text location to be
changed flashes).
Entry of the individual letters, numbers and characters is undertaken using
the LCD Keypad L240/PT. At the flashing text location the arrow keys
can be used to select a letter, figure or character in the text sequence, and
you can change to the next location in the text using the
length of a keypad code / chip key is 14 characters.
Some keys are already pre-assigned to simplify data entry:
1
2
3
AB...
MN...
Z...
0,
With button
an existing text is deleted from the flashing text position
onwards.
X
By pressing button
, the selected keypad code or chip key is again exited
and another keypad code / chip key is selected. By again pressing button
the submenu "Text" is exited.
01
Buttons
for accessing the "Programming" menu
Key/Code
Number _ _ _
Key/Code-001
Hauke, Kristin
Display of the stored or factory default text for 3 seconds.
Key/Code-001
01-Access
Display of the authorization for the selected key / code 001 in module no. 01.
?
Press button
to display the authorization selection:
0=Off
1=Access
2=Set/Unset
3=Set
4=Unset
Select authorization type.
Enter the 3-digit code / key
number
4
5
6
ab...
mn...
z...
Enter the 3-digit code / key
number
><
!
button. The max.
7
8
9
Spac
01...
9...
e
X
67
Advertisement
Table of Contents
