Known Aps Window - Motorola WT4070 Integrator Manual

5 - 32 WT4070/90 Wearable Terminal Integrator Guide
Trace Route Window
Figure 5-41
Enter an IP address or a DNS Name in the
IP combo box should match the information shown in the
the trace route attempts to find all routers between the wearable terminal and the destination. The Round Trip Time
(RTT) between the wearable terminal and each router appears, along with the total test time. The total test time
may be longer than all RTTs added together because it does not only include time on the network.

Known APs Window

The window displays the APs in range using the same ESSID as the wearable terminal. This window is
Known APs
only available in
Infrastructure
Known APs Window
Figure 5-42
See Table 5-22 for the definitions of the icons next to the AP.
Current Profile Window
Table 5-22
Icon
Indicates that the AP is the associated access point, and is set to mandatory.
Indicates that the AP is the associated access point, but is not set to mandatory.
Indicates that the wearable terminal is not associated to this AP, but the AP is set as mandatory.
Indicates that the wearable terminal is not associated to this AP, and AP is not set as mandatory.
Using the navigation keys select an AP. Press
options:
Set Mandatory
Select
Set Mandatory
top of the icon. The wearable terminal connects to the selected AP and never roams until:
•
You select
Set Roaming
combo box. Press
IP
mode. To open the
Blue key
and .
Set Roaming
to prohibit the wearable terminal from associating with a different AP. The letter M displays on
to highlight
TAB
window's IP combo box. When starting a test,
ICMP Ping
window, press
Known APs
Description
- to display a pop-up menu with the following
TAB (Menu)
. Press -
Start Test Blue
.
3
. The
BKSP