Osupdate; Update Loader; Activesync - Motorola WT4070 Integrator Manual

OSUpdate

The wearable terminal contains tools that update all operating system components. All updates are distributed as
packages and/or hex images. Update packages can contain either partial or complete updates for the operating
system. Zebra distributes the update packages on the Support Central Web Site, http://www.zebra.com/support.
Update an operating system component using one of the following:
•
MSP. See Chapter 8, Staging and Provisioning
•
OSUpdate.

Update Loader

To initiate an update using the wearable terminal temp directory:
Go to the Support Central web site, http://www.zebra.com/support.
1.
Download the appropriate update package to a host computer.
2.
Connect the wearable terminal to a host computer using the Single Slot Serial/USB Cradle. See
3.
Accessories.
Using ActiveSync, copy the update package to the \temp directory.
4.
NOTE To control the Voice Only WT4090, it must be connected to a host computer running remote desktop
software. See
On the wearable terminal, use Windows Explorer to navigate to the temp directory.
5.
Open the OSUpdate folder.
6.
Launch the file: 4000c50Ben_TEMP.lnk file.
7.
When the Update Loader application finds the appropriate file, it loads the package onto the wearable terminal.
8.
NOTE On the WT4070/90, a progress bar displays until the update completes.
On the Voice Only WT4090, as soon as OSUpdate starts, all three LEDs turn on and then the three LEDs
indicate the progress of the download. When 33% is completed the first LED turns on, followed by second
LED when 66% is completed and finally the third LED when 100% of the image is downloaded. This process
is repeated for each image included in the OSUpdate package. Depending on the size of each image the time
taken to indicate this progress may vary.
When complete, the wearable terminal re-boots.
9.

ActiveSync

Use ActiveSync to copy files from a host computer to the wearable terminal.
Ensure that ActiveSync is installed and that a partnership has been created, see
Connect the wearable terminal to the host computer using a USB cradle or an appropriate cable, see
1.
2, Accessories for connection information.
On the host computer, select
2.
Select .
3. Explore
for information.
Chapter 4, Voice Only WT4090 Remote Control
> >
Start Programs ActiveSync
Application Deployment
for more information.
Chapter 3,
.
7 - 3
Chapter 2,
ActiveSync.
Chapter