Ipl Error Detection - Motorola WT4070 Integrator Manual

TCM Error Messages (Continued)
Table 7-3
Error
INVALID DIRECTORY
One of the disk sizes is one
sector in size
INVALID VOLUME NAME
Corrupt TCM.INI file!
(Invalid value of
VolumeDivisor)
Invalid version of TCM
script file
Corrupt or missing TCM.ini
file
FAILED CONNECTION TO
COM PORT (Could not get
status)
FAILED CONNECTION TO
TERMINAL (Terminal Not
Connected
Properly/Terminal Not
Ready to Receive)

IPL Error Detection

While receiving data, IPL performs many checks on the data to ensure that the data is received correctly. If an error
is detected, IPL immediately aborts the download, and reports the error on an error screen on a WT4070/90 or with
the LEDs on a Voice Only WT4090.
WT4070/90 Error Indications
Error screens may vary depending on the action being performed. A sample error screen may look like the screen
pictured below:
Downloading:
Platform
via Serial Port 115200
Error # -2: Messages:
Cancelled by user
Press any key to continue
IPL Error Screen
Figure 7-16
In Script Properties window, the selected System File Path is not a valid directory.
In Script Properties window, one of the disks is too small (one sector in size). This
may cause problem while building images, especially when cushion is enabled.
Increase the disk size.
In Script Properties window, one of the volume labels is not valid.
The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall TCM or recover
TCM.ini.
The TCM script was not created by this version of TCM.
TCM could not find TCM.ini file.
While downloading images to wearable terminal, TCM failed to connect to the
selected COM port. Check if the COM port is free and is properly configured.
While downloading images, TCM failed to connect to the wearable terminal. Check if
the correct flow control protocol is selected and the wearable terminal is properly
connected and is in a listening state.
Application Deployment 7 - 17
Description/Solution