Advanced Identity; Encryption - Motorola WT4070 Integrator Manual

Password Dialog Box
Figure 5-17
Enter a password in the
1.
Press to highlight the
2. TAB
Press >
3. ALT BKSP
Press twice to highlight the
4. TAB
Press . The
5. ENTER

Advanced Identity

Use the dialog box to enter the 802.1X identity to supply to the authenticator. This value can be 63
Advanced ID
characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is required before
proceeding.
NOTE When authenticating with a Microsoft IAS server, do not use advanced identity.
Advanced Identity Dialog Box
Figure 5-18
Enter the 802.1x identity information in the
1.
Press .
2. TAB
Enter the domain name in the
3.
Press twice to highlight the
4. TAB
Press . The
5. ENTER

Encryption

Use the dialog box to select an encryption type. The drop-down list includes encryption types available
Encryption
for the selected authentication type. See
Use the navigation keys to select an encryption type.
1.
If or
40-Bit WEP 128-Bit WEP
field.
Password
check box.
Advanced ID
(SPACE) to select the
Advanced ID
button.
Next
dialog box displays. See
Encryption
802.1x Identity
field.
Domain
button.
Next
dialog box displays.
Encryption
Table 5-10
are selected, the Key Index and Use Passkey fields appear.
check box, if advanced identification is required.
Encryption on page
field.
for these encryption types.
Wireless Applications 5 - 15
4-17.