Tunneled Authentication - Motorola WT4070 Integrator Manual

5 - 8 WT4070/90 Wearable Terminal Integrator Guide
Authentication Dialog Box
Figure 5-6
Authentication Options
Table 5-6
Authentication
None
TLS (Fusion 2.4)
EAP-TLS (Fusion 2.5)
PEAP
LEAP
TTLS

Tunneled Authentication

Use the
Tunneled Authentication
selections available for PEAP or TTLS authentication.
Tunneled Authentication Dialog Box
Figure 5-7
To select a tunneled authentication type:
Use the navigation keys to select a tunneled authentication type from the drop-down list. See
1.
Table 5-8.
If you selected the TLS tunnel type that requires a user certificate, the check box is already selected.
Press .
2. TAB
Press >
3. ALT BKSP
Press to highlight the
4. TAB
Default setting when authentication is not required on the network.
Select this option to enable EAP-TLS authentication. EAP-TLS is an authentication
scheme through IEEE 802.1x. It authenticates users and ensures only valid users
can connect to the network. It also restricts unauthorized users from accessing
transmitted information by using secure authentication certificates.
Select this option to enable PEAP authentication. This method uses a digital
certificate to verify and authenticate a user's identity.
Select this option to enable LEAP authentication, which is based on mutual
authentication. The AP and the connecting wearable terminal require authentication
before gaining access to the network.
Select this option to enable TTLS authentication.
dialog box to select the tunneled authentication options. There are different
(SPACE) to select the
User Certificate
button.
Next
Description
check box if a certificate is required.
Table 5-7 and