Configuring The Wearable Terminal; Resetting The Wearable Terminal; Performing A Warm Boot; Performing A Cold Boot - Motorola WT4070 Integrator Manual

1 - 8 WT4070/90 Wearable Terminal Integrator Guide
To save battery power, set the wearable terminal to turn off after a specified number of minutes.

Configuring the Wearable Terminal

•
To customize the wearable terminal settings, refer to the Microsoft Applications for Mobile and CE 5.0 User
Guide.
•
To set up ActiveSync to synchronize the wearable terminal with the host computer, see
ActiveSync.
•
To configure the wearable terminal for wireless LAN network, see
•
To deploy software on the wearable terminal, see

Resetting the Wearable Terminal

There are two reset functions, warm boot and cold boot. A warm boot restarts the wearable terminal by closing all
running programs.
A cold boot also restarts the wearable terminal, but erases all stored records and entries in RAM. Data saved in
flash memory is not lost. In addition it returns formats, preferences and other settings to the factory default settings.
Perform a warm boot first. This restarts the wearable terminal and saves all stored records and entries. If the
wearable terminal still does not respond, perform a cold boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the wearable terminal starts to perform a
warm boot release the Power button.

Performing a Cold Boot

A cold boot restarts the wearable terminal and erases all user stored records and entries that are not saved in flash
memory (Application and Platform folders). Never perform a cold boot unless a warm boot does not solve the
problem.
NOTE Any data previously synchronized with a computer can be restored during the next ActiveSync operation.
To perform a cold boot on a WT4070/90 press and simultaneously hold the Power button and the
not hold down any other keys or buttons. The wearable terminal initializes.
To perform a cold boot on a Voice Only WT4090 press and simultaneously hold the P1 and P2 keys, and the
Power button. The Voice Only WT4090 initializes.

Battery Management

Battery Saving Tips

•
Place the wearable terminal in a cradle connected to AC power at all times when not in use.
Chapter 5, Wireless
Chapter 7, Application Deployment.
Chapter 3,
Applications.
and keys. Do
1 9