2 - 6
WT4070/90 Wearable Terminal Integrator Guide
Four Slot Ethernet Cradle
Ensure that you follow the guidelines for battery safety described in
CAUTION
10-3.
This section describes how to set up and use a Four Slot Ethernet cradle with the wearable terminal.
The Four Slot Ethernet cradle:
•
Provides 5.4 VDC power for operating up to four wearable terminals.
•
Enables data communication between the wearable terminal (up to four) and a host computer, over an
Ethernet network (using a standard 10Base-T Ethernet cable).
•
Simultaneously charges up to four wearable terminals (with batteries installed).
You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer, use the Single
Slot USB cradle.
Use only an approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative
CAUTION
power supply will void the product warranty and may cause product damage. See the WT4070/90
User Guide for the power supply regulatory compliance statement.
Connect the Ethernet cradle (Ethernet port 1) to an Ethernet hub or a port on the host device. Connect the Ethernet
cradle (power port) to an approved power supply.
Battery Safety Guidelines on page