Keypad Light; Power - Motorola WT4070 Integrator Manual

9 - 2 WT4070/90 Wearable Terminal Integrator Guide
Ensure that the Disable backlight if not used for checkbox is checked.
4.
In the drop-down list, select the amount of time after which the display will turn off. Set to 1 minute or a lower
5.
value that the user is comfortable with.
To set the brightness level of the display:
Select Brightness tab.
1.
Move the slider to 2 to conserve power.
2.
Select OK.
3.

Keypad Light

NOTE Changing the Keypad Backlight setting on the Voice Only WT4090 will change the brightness of the
WLAN Status LED. Refer to the EMDK Help file WT4090-VOW Programming page for more information.
To set the amount of time that the keypad light stays on:
Select Start > Settings > Control Panel.
1.
Select Keylight icon.
2.
Select Battery Power tab.
3.
Ensure that the Disable keylight if not used for checkbox is checked.
4.
In the drop-down list, select the amount of time after which the keypad light will turn off. Set to 1 minute or a
5.
lower value that the user is comfortable with.
To disable the key light from coming on:
Select the Advanced tab.
1.
Ensure that the Disable keylight checkbox is checked.
2.
Tap OK.

Power

To set the wearable computer to turn off after a short period of non-use:
Select Start > Settings > Control Panel.
1.
Select Power icon.
2.
Select Power Off tab
3.
Ensure that the Turn off device if not used for checkbox is checked
4.
In the drop-down list, select the amount of time after which the device will turn off. The default setting is 3. If
5.
desired, lower this value to 1 to conserve power.
To set the CPU to maximum performance:
Select CPU Power tab.
1.
Ensure that the Max. Performance radio button is selected. This selection maximizes battery life.
2.
Select Apply.
3.