Log On/Off Application; User Already Logged In; No User Logged In - Motorola WT4070 Integrator Manual

Log On/Off Application

When the user launches the
logged onto the wearable terminal by already entering credentials through the login box, or there are no user
logged on. Each of these states have a separate set of use cases and a different look to the dialog box.

User Already Logged In

If already logged into the wearable terminal, the user can launch the login dialog box for the following reasons:
•
Connect to and re-enable a cancelled profile. To do this:
• Launch the Log On/Off dialog.
• Select the cancelled profile from the profile list.
• Login to the profile.
NOTE Re-enable cancelled profiles using the Profile Editor Wizard and choosing to connect to the cancelled
profile. Cancelled profiles are also re-enabled when a new user logs on.
•
Log off the wearable terminal to prevent another user from accessing the current users network privileges.
•
Switch wearable terminal users to quickly logoff the wearable terminal and allow another user to log into the
wearable terminal.

No User Logged In

If no user is logged into the wearable terminal, launch the login dialog box and log in to access user profiles.
The dialog box varies if it is:
Login
•
Launched by WCS, because the service is connecting to a new profile that needs credentials.
•
Launched by WCS, because the service is trying to verify the credentials due to credential caching rules.
•
Launched by a user, when a user is logged in.
•
Launched by a user, when no user is logged in.
Log On/Off Options
Table 5-28
Field
Wireless Profile Field
Profile Status Icon
application, the wearable terminal may be in two states; the user may be
Log On/Off
When launching the login application, the Wireless Profile field has available all the
wireless profiles that require credentials. This includes profiles that use EAP TLS,
PEAP, LEAP, and EAP-TTLS.
The profile status icon (next to the profile name) shows one of the following states:
The selected profile is cancelled.
The selected profile is enabled but is not the current profile.
The profile is the current profile (always the case for WCS Launched).
Wireless Applications 5 - 39
Description