Four Slot Spare Battery Charger
Ensure that you follow the guidelines for battery safety described in
CAUTION
10-3.
This section describes how to set up and use the Four Slot Spare Battery Charger to charge up to four spare
batteries.
Four Slot Spare Battery Charger Setup
Figure 2-9
Use only an approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative power
CAUTION
supply will void the product warranty and may cause product damage. Refer to the WT4070/90 User Guide
for the power supply regulatory compliance statement.
Spare Battery Charging
Connect the charger to a power source.
1.
Insert the battery into a spare battery charging slot and press down on the battery to ensure proper contact.
2.
Spare Battery Charging
Figure 2-10
Spare Battery Charging Well (4)
Spare Battery Charge
Status LEDs (4)
Accessories 2 - 11
Battery Safety Guidelines on page